Blog › Fabric and supplies

What Fabric Count Is Best for Your Skill Level?

8 November 2026 · 5 min read · By Crosserly

Start on 14-count Aida: the squares are big enough to see and count easily, and patterns still look neat. Once counting feels easy, many stitchers try 16- or 18-count Aida or 28-count evenweave, and experienced stitchers often work on 32-count linen or finer. There is no wrong answer: your eyesight and taste matter as much as your skill.

A count for every stage

The count is how many stitches fit in an inch. Aida is counted in squares per inch. Evenweave and linen are counted in threads per inch and usually stitched over 2 threads, so 28-count gives 14 stitches an inch.

These are habits, not rules. Lots of experienced stitchers stay on 14-count Aida because they like how it looks, and some beginners start on 16-count without any trouble. If you are deciding between Aida and linen as well, see Aida vs linen for beginners.

How the count changes the size of a pattern

A pattern’s size is given in stitches, wide by high. The count decides how big each stitch is, so the same pattern comes out a different size on each fabric. Divide the stitches by the count to get inches, then multiply by 2.54 for centimetres.

Here is one pattern, 150 stitches wide and 100 high, on four fabrics:

FabricStitches an inchFinished sizeStrands
11-count Aida1134.6 × 23.1 cm (13.6 × 9.1 in)3
14-count Aida, or 28-count over 21427.2 × 18.1 cm (10.7 × 7.1 in)2
16-count Aida, or 32-count over 21623.8 × 15.9 cm (9.4 × 6.3 in)2
18-count Aida, or 36-count over 21821.2 × 14.1 cm (8.3 × 5.6 in)2

On 14-count that is 150 ÷ 14 = 10.7 in wide and 100 ÷ 14 = 7.1 in high. Add 7.5 cm (3 in) of spare fabric on every side for a hoop and for framing, and you cut a piece of about 43 × 34 cm (17 × 14 in).

A higher count is not more stitching

Moving up a count does not add stitches. That 150 × 100 pattern is 15,000 stitches if every square is filled, on 11-count or on 18-count. What changes is the size of each stitch: smaller ones need closer looking and a finer needle, so some people stitch a little slower on high counts at first.

So choose the count for the look you want. For a photo pattern with finer detail in a smaller space, go up a count. For a bigger piece on the wall without a single extra stitch, go down one. How long a project takes is set by the stitches, not the fabric.

How many strands for each count

Embroidery floss comes as 6 thin strands twisted together. You pull out the number you need and stitch with them side by side. Too few, and the fabric shows between your crosses; too many, and the stitches look crowded and lumpy.

Tip: Not sure? Stitch a few crosses on the edge of your fabric with 2 strands and a few with 3, then look from arm’s length. Use whichever covers the way you like.

Picking a count to fit a frame

If you already have a frame, or a space on the wall, work backwards: divide the pattern’s stitches by the width you want, in inches. The answer is the lowest count that fits.

  1. Measure the space inside the frame: say 23 cm (9 in) wide.
  2. Divide the stitches by the inches: 150 ÷ 9 = 16.7 stitches an inch.
  3. Round up to a count you can buy. 16-count would make it 9.4 in, too wide, so choose 18-count: 21.2 cm (8.3 in), with a little border to spare.

The fabric calculator does these sums for any count of Aida, evenweave or linen, and tells you the strands and how much fabric to cut.

What makes a fine count easier

Found an old piece of fabric and not sure what it is? Here is how to tell its count with a ruler.

Crosserly is a free cross stitch pattern maker. Turn a photo or a few words into a chart in real thread colours, or draw your own, then print it or follow it on your phone.

Work out your fabric

Questions

Is 18-count too small for beginners?

Not too small, but harder. Each square is about 1.4 mm across, so you need good light and careful counting. If you can see it comfortably, go ahead; if you find yourself squinting, start on 14-count.

What is the most common cross stitch fabric count?

14-count Aida is the one you will see most often, in shops and in kits. 16- and 18-count Aida are common too, and on evenweave and linen, 28- and 32-count are the usual choices.

Should children start on 11-count?

Often, yes. The bigger squares are easier for small hands and young eyes to find, and fewer stitches fill each inch. For very young children, plastic canvas, a stiff grid with large holes, is an even easier start.

Read next

All blog posts · Guides: Photo to pattern guide · Cross stitch app for beginners · PDF charts on iPhone