Blog › Designing patterns

Cross Stitch Alphabet: Free Letter Chart to Stitch Any Name

8 November 2026 · 5 min read · By Crosserly

Below is a free cross stitch alphabet: capitals A to Z and the numbers 0 to 9, each 5 squares wide and 7 high. Leave one empty square between letters and three between words, and a 6-letter name comes out 35 squares wide, about 6.4 cm (2.5 in) on 14-count Aida.

The alphabet chart

Here are capital letters A to Z and the numbers 0 to 9 as a plain block alphabet, each one 5 squares wide and 7 high. Each filled square is one full cross. Type a name or a date in the box under the chart to see it laid out letter by letter, with its size in stitches and on 14-count Aida.

Cross stitch alphabet chart: capital letters A to Z and digits 0 to 9, each 5 squares wide and 7 squares high. One square is one cross stitch.

Block letters like these are the easiest to stitch: straight lines, no part stitches and no curls. They suit a first project, a bookmark, or a name on a gift. If you are new to charts, how to read a cross stitch pattern explains the grid.

Spacing letters, words and lines

Look at the word from across the room before you stitch it. A letter with open space on one side, such as L or T, can leave a gap that looks too wide. You can move the next letter one square closer, as long as the stitches of the two letters do not touch.

How big a name will be

Count the squares before you buy fabric. In this alphabet, a word is 5 squares for each letter plus 1 for each gap between them, and every space between words adds 3.

  1. A 6-letter name, such as OLIVIA: 6 × 5 = 30 squares of letters, plus 5 gaps = 35 squares wide, 7 high.
  2. On 14-count Aida: 35 ÷ 14 = 2.5 in (6.4 cm) wide and 7 ÷ 14 = 0.5 in (1.3 cm) high.
  3. Two words, such as JO SMITH: 7 letters × 5 = 35, plus 5 gaps inside the words and 3 for the space = 43 squares, or 3.1 in (7.8 cm) on 14-count.

A name 1.3 cm (0.5 in) tall reads well on a card, a bookmark or under a picture. For a name that fills a frame, use bigger letters or a lower count: how big your cross stitch will be shows the sums for any count.

Centring a name on your fabric

  1. Count the name’s width and height in squares: OLIVIA is 35 × 7.
  2. Find the middle square of the name. In this alphabet a single word always has an odd width, so there is one middle column: the 18th of 35, with 17 on each side.
  3. Find the middle of the fabric by folding it in half both ways: the creases cross at the centre.
  4. Put the name’s middle column on the centre, with 3 rows of the letters above it and 3 below.

In OLIVIA, the 18th column is the empty gap between I and V. So start V one square to the right of the centre, and finish the first I one square to the left. With an odd number of letters, the centre falls on the middle column of the middle letter. How to start cross stitching shows the folding in more detail.

Tip: Putting a name under a picture? Centre it on the picture’s middle column, not the fabric’s, in case the picture is not quite centred.

Thread, strands and backstitch letters

Letters need to stand out, so choose a thread with strong contrast: dark on light fabric, or light on dark. One colour for the whole name keeps it simple. A variegated thread, which changes shade along its length, gives a name colour without any thread changes.

Use the same strands as the rest of the piece: usually 2 on 14- to 18-count and 3 on 11-count. On small letters every stitch shows, so keep all the top stitches leaning the same way.

Backstitch letters are the other option. Instead of filling squares with crosses, you stitch lines along the edges of the squares, usually with 1 or 2 strands. They can be smaller than cross-stitched letters and still read clearly, which is why many patterns use them for a short saying or a date under a picture.

Other fonts: script, serif and more

A block alphabet is only one look. Script letters with joins and curls, and serif letters with small feet like a printed book, need more squares: the curves and thin strokes need room, so they are usually much taller than 7 rows.

Drawing a new font on squared paper takes time. In Crosserly’s Words, you type a name, a date or a saying and it is laid out in stitched letters in a choice of fonts, from script and serif to bold and handwritten. You choose a thread colour and a letter size, with capitals about 10, 16 or 24 stitches tall, and it shows how big it will be on your fabric.

Samplers with names and dates

A sampler is a stitched piece that shows off letters, numbers and small motifs, often signed with a name and a year. Old samplers were practice pieces. Today they make lasting gifts: a birth sampler with a baby’s name, date and weight, or a wedding sampler with two names and the date.

For more ideas, see cross stitch gifts people actually want.

Crosserly is a free cross stitch pattern maker. Turn a photo or a few words into a chart in real thread colours, or draw your own, then print it or follow it on your phone.

Stitch a name, free

Questions

How do you cross stitch letters?

Follow a letter chart square by square, one full cross per filled square, leaving an empty square between letters. Find the middle of the fabric first and count out from it so the word ends up centred.

How many squares tall should cross stitch letters be?

Plain block capitals read clearly from about 5 squares tall, and 7 gives room for rounder shapes like S and G. Script and serif letters need more, often 10 or more squares, so their curves and thin lines show.

Can I stitch lowercase letters?

Yes, but they need extra rows below the line for the tails of g, j, p, q and y. A name with lowercase letters takes more height than the same name in capitals.

Read next

All blog posts · Guides: Photo to pattern guide · Cross stitch app for beginners · PDF charts on iPhone