Blog › Fabric and supplies

How Big Will My Cross Stitch Be? Size From Stitches and Count

8 November 2026 · 5 min read · By Crosserly

Divide the pattern’s stitches by your fabric’s stitches per inch: that is the finished size in inches, and multiplying by 2.54 gives centimetres. A design 140 stitches wide on 14-count Aida is 140 ÷ 14 = 10 in (25.4 cm) wide. Then add 7.5 cm (3 in) on every side for the fabric you cut.

The sum: stitches divided by stitches per inch

A pattern gives its size in stitches, wide by high, such as 200 × 150. That number never changes. The fabric decides how big each stitch is, so work out the width and the height one at a time:

  1. Find the stitches per inch for your fabric (see below).
  2. Divide the stitches wide by it: 200 ÷ 14 = 14.3 in.
  3. Divide the stitches high by it: 150 ÷ 14 = 10.7 in.
  4. For centimetres, multiply each by 2.54: 36.3 × 27.2 cm.

On Aida, the count is the stitches per inch: 14-count Aida has 14 squares to the inch, so 14 stitches. If you think in centimetres, 14-count is about 5.5 stitches per cm and 18-count about 7.1.

Evenweave and linen: over 2 or over 1

Evenweave and linen are counted in threads per inch, not squares. Most patterns on them are stitched over 2 threads each way, so halve the count to get stitches per inch:

Stitched over 1 thread, every thread is a stitch, so 28-count over 1 gives 28 stitches per inch and the design comes out half the size: 100 stitches is 3.6 in (9.1 cm). That suits tiny lettering and small details, with 1 strand. Aida, evenweave and linen compared explains how the fabrics differ to stitch on.

Two patterns on five fabrics

Fabric100 × 100 stitches200 × 150 stitches
11-count Aida23.1 cm (9.1 in) square46.2 × 34.6 cm (18.2 × 13.6 in)
14-count Aida18.1 cm (7.1 in) square36.3 × 27.2 cm (14.3 × 10.7 in)
16-count Aida15.9 cm (6.3 in) square31.8 × 23.8 cm (12.5 × 9.4 in)
18-count Aida14.1 cm (5.6 in) square28.2 × 21.2 cm (11.1 × 8.3 in)
28-count evenweave over 218.1 cm (7.1 in) square36.3 × 27.2 cm (14.3 × 10.7 in)

The stitching is the same in every row: 10,000 squares for the small pattern and 30,000 for the big one, if every square is filled. Only the size of each stitch changes, which is why a pattern bought for 14-count looks so much bigger on 11-count.

How much fabric to cut

Add 7.5 cm (3 in) of spare fabric on every side, so 15 cm (6 in) to each measurement. The spare holds the fabric in a hoop or frame while you stitch, and leaves enough to mount or frame it afterwards. For the 200 × 150 pattern on 14-count:

  1. Width: 36.3 cm + 15 cm = 51.3 cm, or 14.3 in + 6 in = 20.3 in.
  2. Height: 27.2 cm + 15 cm = 42.2 cm, or 10.7 in + 6 in = 16.7 in.
  3. Round up: cut at least 52 × 43 cm (21 × 17 in).

The fabric calculator does these sums for any count of Aida, evenweave or linen, over 2 or over 1, and tells you how many strands to use and how many stitches a skein covers.

Choosing a frame size

Frames are sold by the size of picture they hold, such as 25 cm (10 in) square or 40 × 50 cm (16 × 20 in). Pick one a few centimetres bigger than the stitching each way, so a border of bare fabric shows round the design.

The 100 × 100 pattern on 14-count is 18.1 cm (7.1 in) square. In a 25 cm (10 in) square frame it has 3.4 cm (1.4 in) of fabric round it on every side. The 200 × 150 pattern on 14-count fits a 40 × 50 cm (16 × 20 in) frame with 6 to 7 cm (2.5 to 3 in) all round.

Tip: Choose the frame before you cut the fabric. To lace or tape it over a backing board, the fabric needs to reach about 5 cm (2 in) past the board on every side. For the 25 cm (10 in) frame that means cutting 35 cm (14 in) square, a little more than the 33 cm (13 in) the stitching alone needs.

How to frame cross stitch goes through mounting and framing step by step.

Check a pattern’s size before you buy it

A listing usually gives the stitch count, and so does the chart’s cover page: how to read a cross stitch pattern shows where to look. Say a pattern is 250 × 167 stitches. On 14-count Aida it comes out at 45.4 × 30.3 cm (17.9 × 11.9 in), and you would cut about 61 × 46 cm (24 × 18 in) of fabric.

Making a pattern bigger or smaller

The quickest way is to change the fabric. The same chart is bigger on a lower count and smaller on a higher one, without a single extra stitch. To fit a frame you already have, divide the stitches by the inches you have and round up to a count you can buy: choosing a count for your skill level works through it.

To change the stitch count itself, you need a pattern you can edit. In Crosserly you set the size in stitches: it starts you on Small (80 stitches on the longer side), Medium (150) or Large (250), and any size up to 1000 × 1000 works. Fewer stitches means a smaller piece with less detail; more means more detail and more hours. Then pick the count that fits your frame.

Crosserly is a free cross stitch pattern maker. Turn a photo or a few words into a chart in real thread colours, or draw your own, then print it or follow it on your phone.

Work out your fabric

Questions

How do I work out cross stitch size in cm?

Divide the stitches by the fabric count to get inches, then multiply by 2.54. Or divide by the stitches per cm: about 4.3 for 11-count, 5.5 for 14-count and 7.1 for 18-count.

Do more strands make a cross stitch bigger?

No. Only the fabric count sets the size. More strands make each cross thicker and cover the fabric more fully, which is why 11-count usually takes 3 strands and 14-count takes 2.

Is 18-count smaller than 14-count?

Yes. 18-count fits 18 stitches into an inch instead of 14, so the same pattern comes out a little over three quarters of the size each way. A design 100 stitches wide is 18.1 cm (7.1 in) on 14-count and 14.1 cm (5.6 in) on 18-count.

Read next

All blog posts · Guides: Photo to pattern guide · Cross stitch app for beginners · PDF charts on iPhone