The Crosserly guide: make a cross stitch pattern, then stitch it

Everything in one place, from your first pattern to your last stitch. Part one goes through every part of the pattern maker. Part two shows how to stitch, with a 3D needle and thread you can play, stop, slow down and turn over.

Make a pattern, free

The whole way in 2½ min

Watch the video: How to Make a Cross Stitch Pattern from a Photo, Free (2:29)

  1. 0:00 Turn a photo into a cross stitch pattern
  2. 0:14 Add your photo and choose the picture type
  3. 0:28 Pick a size and see your chart
  4. 0:48 Fabric count, thread brand (DMC, Anchor) and number of colours
  5. 1:05 Add a name and date, fix a stitch by hand
  6. 1:20 3D hoop preview and Stitch Assist
  7. 1:39 Shopping list and printable PDF
  8. 1:57 Free account, words, blank charts, open a PDF or OXS pattern
  9. 2:16 Free patterns, fabric calculator and DMC colour chart

Part 1: Make your pattern

Every part of the pattern maker: from a photo or words to a chart, the 3D preview, Stitch Assist, the shopping list and the PDF.

Start a pattern

Watch this part of the video (0:14): Add your photo and choose the picture type

Open the pattern maker. You do not need an account to make a pattern. A window called Start a pattern asks: What would you like to stitch? There are four ways in:

ChooseWhat it does
A photoTurns a picture of a pet, a person or a place into a chart.
WordsLays out a name, a date or a saying in stitched letters, in the font and thread you pick.
Draw your ownOpens a blank chart to fill in stitch by stitch: Small (40 × 40), Medium (80 × 80), Large (150 × 150) or any size up to 1,000 a side.
Open a patternOpens a PDF or OXS chart you already have, ready for Stitch Assist.

You can also drop or paste a photo anywhere in the pattern maker, and it starts from that. To stitch someone else’s design, pick one from Free Patterns and press Stitch this pattern: it opens as your own copy.

Crosserly keeps the pattern on your screen in your browser, so if you close the tab and come back, it is just as you left it. That is only the one pattern on screen: to keep more, see Save, My patterns and your account.

Tip: New to it all? Watch how it works under the four choices plays the 2½ minute video of the whole way, from a photo to the PDF.

Make a pattern from a photo

Watch this part of the video (0:14): Add your photo and choose the picture type

  1. Choose A photo, then Choose a photo (on a phone you can take one there and then).
  2. Under What is in it?, pick the closest picture type. Each makes the pattern its own way: the table below says how.
  3. Under Background, choose Keep it (the whole picture is stitched), Remove it (only the subject is stitched and the fabric shows round it) or Simplify it (the background is stitched calmly, in a few colours).
  4. Under Size (stitches), choose Small (80 stitches on the longer side), Medium (150), Large (250) or Custom. The window shows how big that will be on your fabric.
  5. Press Make my pattern. Your chart is ready in a few seconds, and everything can still change.
Picture typeBest for
PhotoThe whole picture, background included
Pet or personBackground removed, edges rounded
PortraitA face, with a soft, simple background
Logo or textCrisp edges, few colours
CartoonFlat colours with outlines
PaintingArt and illustrations
HDFull coverage, every stitch filled, painterly: the default
BeginnerSmall, few colours, easy to stitch

Photos that stitch well have one clear subject, good light and not too much going on behind. Crop in close before you add it: a face that fills the picture keeps far more detail than one far away. Under 80 stitches, a photo loses its detail, and Crosserly says so.

Signed in, with threads ticked in My threads, a Threads choice appears too: Any DMC, Only mine or Mostly mine.

Tip: Not sure which type? Make it once, then try another in step 1 Design of the settings. The chart changes in a moment, and Undo is never far away.

Words, and drawing your own

Watch this part of the video (1:57): Free account, words, blank charts, open a PDF or OXS pattern

Choose Words to stitch a name, a date or a saying. Type it under Your words (up to 80 letters), then pick a Font, a Thread colour and a Letter size: Small, Medium or Large, about 10, 16 or 24 stitches tall for a capital. Press Make my pattern. Change the words later in step 1 Design, and the chart follows as you type.

Choose Draw your own for a blank chart. Pick a size (or type a width and height in stitches), give it a name and press Start drawing. It opens with the drawing tools ready: see Change stitches by hand.

To put a name and date under a photo pattern instead, use the Name and date step.

The settings, step by step

Every choice can change after the chart is made. On a computer the settings are on the left; on a phone, press Settings in the bar at the bottom. They come in numbered steps:

Settings with an (i) beside them explain themselves when you tap it. More options under a step opens the rarer ones, and Reset settings (top right, once you have changed something) puts them all back.

If you have changed stitches by hand or marked stitches done, changing a setting asks first: Start again from your photo? Make a new chart starts over from the photo; Keep my changes keeps your chart as it is.

Size and fabric

Watch this part of the video (0:48): Fabric count, thread brand (DMC, Anchor) and number of colours

A pattern’s size is counted in stitches, and that number stays put. How big it ends up depends on your fabric: the count is how many stitches fit in an inch.

FabricStitches an inch150 × 100 stitches comes out atStrands
11-count Aida1134.6 × 23.1 cm (13.6 × 9.1 in)3
14-count Aida, or 28-count over 21427.2 × 18.1 cm (10.7 × 7.1 in)2
16-count Aida, or 32-count over 21623.8 × 15.9 cm (9.4 × 6.3 in)2
18-count Aida, or 36-count over 21821.2 × 14.1 cm (8.3 × 5.6 in)2

Evenweave and linen are usually stitched over 2 threads, so 28-count works out the same size as 14-count Aida. More options has Keep proportions, and Crop to the subject when the background is removed.

Tip: 14-count Aida is the usual first fabric: big enough to see the holes, small enough for detail. The fabric calculator does these sums for any chart.

Colours and threads

Watch this part of the video (0:48): Fabric count, thread brand (DMC, Anchor) and number of colours

Step 3 Colours chooses the threads. Every colour in your chart is a real thread you can buy.

More options has finer controls: Merge similar shades, Fewest stitches per colour, Only these threads (type thread numbers), New threads to buy, at most, Always use and Never use.

You can also change one thread at a time in the threads list beside the chart: press … on a thread for Use a different thread, Merge into a similar thread, Remove its stitches or Draw with this thread.

Name and date, and a border

Watch this part of the video (1:05): Add a name and date, fix a stitch by hand

Step 4 Name and date stitches words with a photo pattern: a name, a date or both, for a gift or a birth sampler.

Fine-tune the picture

Step 5 Fine-tune has four rows. Each shows what it is set to; tap it to change it. You rarely need them, but they help when a pattern is nearly right.

RowWhat it changes
BackgroundHow the background is found (Automatic, Find the subject, From the edges, One colour, or Stitch everything) and what happens to it: Remove, Simplify, Solid or Keep.
Detail and clean-upSimplify (fewer, bigger patches of colour) and Dithering (dots of two colours to make a shade in between; Off for a cleaner look).
Outlines and edgesBackstitch outline (None, Around it, All edges) and Smooth edges with 3/4 stitches, which rounds off a cut-out subject.
Adjust the pictureAuto-enhance, Brightness, Contrast, Saturation and Sharpen; under More options, Grey or Sepia, Rotate and Flip.

Tip: A dark photo loses detail. If the threads list says Dark areas may lose detail, its Brighten button fixes it in one tap.

Your chart on screen

Watch this part of the video (0:28): Pick a size and see your chart

Across the top are the views: Chart, 3D, Assist and Shopping list (on a phone, the bar at the bottom has Chart, 3D, Threads, Assist and Settings).

Over the chart, choose how it looks:

Zoom with the − and + buttons, or Fit the chart to see it all (keys −, + and 0). Point at a stitch to see its column, row and thread; tap one to pick out every stitch of that thread. Bold lines mark every 10 stitches, as on a printed chart.

The threads list (beside the chart, or Threads on a phone) shows how hard the pattern is (Beginner, Intermediate or Advanced), how many stitches, its finished size, about how many hours it takes, and each thread with its stitches and skeins. Tips appear when something could be better, each with a button that fixes it.

Change stitches by hand

Watch the video (1:27): How to Edit a Cross Stitch Pattern by Hand: Draw, Fill, Erase, Undo

Press Edit under the chart. A tray of tools opens, with one line at the top saying what the chosen tool does. Press Done (or Esc) when you have finished.

ToolKeyWhat it does
MoveH, or hold SpaceMoves round the chart without changing anything.
DrawBStitches where you tap or drag.
LineLA straight line of stitches.
FillFFills an area of one colour. This area, or Everywhere to change every stitch of that thread.
EraseETakes stitches out, so the fabric shows.
PickIPicks up the thread of a stitch, to draw with it.
SelectSBox or Freehand, then Copy, Cut, Paste, Mirror, Flip, Turn, Crop or Delete.

Draw, Line and Erase work with any kind of stitch: Cross, Half, Three-quarter, Quarter, Petite, Backstitch or French knot, in a brush of 1, 2 or 3 squares. The thread button chooses the colour: one already in the pattern, None (no stitch), or any thread of your brand by number or name.

Undo (Ctrl+Z) and Redo (Ctrl+Shift+Z) take back anything. More has Chart size… (add or take away rows and columns on any side), Tidy stray stitches and Select all.

Tip: Changing a setting after editing asks before it starts again from the photo, so hand work is never lost by accident.

See it in 3D before you stitch

Watch this part of the video (1:20): 3D hoop preview and Stitch Assist

Press 3D to see your pattern stitched, on fabric, in the hoop it fits, before you buy a thread. The bar says which hoop, for example Fits a 20 cm (8 in) hoop. Pieces too big for a hoop go on a scroll frame or a wooden frame instead.

If the 3D view has trouble on an older device, it offers Try simpler 3D, or Show the stitched picture instead.

Stitch from your phone with Stitch Assist

Watch the video (1:28): How to Follow a Cross Stitch Pattern on Your Phone: Stitch Assist

Stitch Assist is the chart on your phone, tablet or computer while you stitch. It keeps your place, so you never lose count. Press Assist. It needs no account.

Choose how it works:

Guide me works the way most stitchers do: one colour at a time, one patch of it after another, each row started from the end nearer your needle. The thread carries on over the bold lines, which are only for counting. It says to end the thread and start a new one when the next stitch of that colour is more than 3 squares away over bare fabric. Rows are worked half crosses first and back (the Danish way), single stitches one at a time. Part stitches, backstitch and French knots come after the crosses.

Your progress is kept in this browser as you go. To keep it in your account, on any device, press Save (or Update): see Save.

Tip: Stitching a pattern you bought? Open it as a PDF or OXS file and Stitch Assist works on it the same way.

The shopping list: threads and fabric

Watch this part of the video (1:39): Shopping list and printable PDF

Press Shopping list (on a phone: Threads, then Shopping). It counts every skein you need and how much fabric to cut.

Buying for a pattern from somewhere else? The fabric calculator does the same sums from a pattern’s size in stitches.

Print it: the PDF

Watch the video (1:26): How to Print a Cross Stitch Pattern as a PDF: Every Option Explained

Press Export PDF (PDF on a smaller screen). It needs a free account: sign in, and the Download PDF window opens. Choose how your pattern looks on paper:

The PDF has the cover, a page on how to start, the thread list (symbol, thread, name, strands, stitches and skeins), a map of the whole pattern, then the chart over as many pages as it needs, split at the bold 10-stitch lines. Its charts are Pattern Keeper compatible: tracking apps can read them, and Crosserly can open them again.

OXS file, in the same window, saves the chart for other cross stitch apps.

Save, My patterns and your account

Watch this part of the video (1:57): Free account, words, blank charts, open a PDF or OXS pattern

Making, changing, 3D, Stitch Assist and the shopping list need no account. A free account adds the rest:

No accountFree account
Make and change patterns, 3D, Stitch AssistYesYes
Shopping listYes, ticks kept in this browserYes, ticks go into My threads
The pattern on screen comes back next visitYes, in this browserYes, in this browser
PDF and OXS downloadsYes
Save patterns, on any device5 patterns
My threadsYes
Share on Free PatternsYes

Press Save, name your pattern and press Save. It goes into My patterns with its changes and your stitching progress. Later, Update saves the changes; Save as New Pattern keeps the old one and makes a copy.

Your account keeps 5 patterns. When it is full, saving asks which one to replace: the one you replace is deleted, with its progress. Patterns you shared on Free Patterns do not count towards the 5.

My patterns (at the top) lists them, with Saved and Shared tabs, a search and how far each one is stitched. Leaving with changes not saved asks first, and if you saved a newer version on another device, Crosserly offers to open it.

My threads: patterns from the threads you have

Watch the video (0:51): Make a Cross Stitch Pattern from the Threads You Already Have

My threads is a list of the threads you own, saved to your account. Open it from your account menu, the threads list or the Colours step.

  1. Sign in and open My threads.
  2. Find each thread by number or name and press I have it, or Add a list: paste or type the numbers, then Add these.
  3. Use − and + to say how much you have, in half skeins.
  4. In step 3 Colours, set Threads to use to Only mine, or Mostly mine to allow up to 3 new threads.

The shopping list then shows only what is missing. Patterns from your stash goes into this in more detail.

Open a pattern you bought

Watch this part of the video (1:57): Free account, words, blank charts, open a PDF or OXS pattern

Choose Open a pattern in Start a pattern, then pick the PDF or OXS file. Crosserly reads the chart and its threads, and it opens ready for Stitch Assist, on iPhone, iPad, Android or a computer.

More on this in PDF charts on iPhone.

Share it free, or stitch someone else’s

Watch the video (0:56): Share Your Cross Stitch Pattern Free, or Stitch Someone Else’s

Free Patterns is where stitchers share their patterns free. Anyone can open one, change anything and stitch it.

  1. Signed in, press Marketplace beside the chart (or Add to Marketplace in My patterns). A pattern not saved yet is saved first.
  2. Give it a Pattern name, check the Level, and choose up to 3 Tags.
  3. Press Add to Marketplace. The listing’s picture is drawn from your chart. It carries the chart, its threads and settings, and the photo it was made from, so others can change it.
  4. It shows on Free Patterns once it is approved, usually within a day. If it is not accepted, My patterns says why.

To stitch a shared pattern, open it on Free Patterns and press Stitch this pattern. It opens as your own copy, no account needed. A copy you change can be shared again, and it says Based on, with the first maker’s name. A copy that is still the same cannot.

Part 2: Stitch it

From the supplies and the chart to every stitch, with a 3D needle you can watch: full and half crosses, rows, starts and ends, part stitches, backstitch and French knots.

What you need

Your pattern’s shopping list counts the skeins and the fabric. The best supplies for beginners explains each one.

Read the chart

A big chart is split over pages. Crosserly’s PDF has a map of the pages, and faded edges that repeat a little of the next page so they line up.

More, with pictures: how to read a cross stitch pattern.

Prepare the fabric

  1. Cut the fabric with 7.5 cm (3 in) spare on every side of the design. The shopping list gives the size.
  2. If the edges fray, fold masking tape over them, or oversew them with any thread.
  3. Fold the fabric in half one way, then the other, and pinch the folds. The middle is where they cross: mark it with a pin.
  4. Find the middle of the chart, where the arrows on its edges meet.
  5. If you use a hoop, put the middle of the fabric in it, firm and flat but not stretched out of shape.

Starting in the middle keeps the design centred, with even margins, so you never run out of fabric on one side.

Separate the strands and thread the needle

Floss is 6 thin strands twisted together, and you stitch with only some of them, usually 2. The pattern says how many.

  1. Cut about 45 cm (18 in) of floss from the skein. Longer threads tangle and wear thin.
  2. Hold the cut end, pick out one strand and pull it straight up, slowly. The rest bunch up and smooth out again.
  3. Take out as many strands as you need, one at a time, and lay them side by side.
  4. Fold the end over the needle, pinch the fold flat and push it through the eye.
FabricStrands for cross stitch
11-count Aida3
14- to 18-count Aida, 28- to 36-count over 22
20-count and finer1, or 2 for a fuller look
Backstitch, any fabricUsually 1

Tip: Every so often, let the needle hang down so the thread untwists. A twisted thread makes thin, uneven stitches.

A full cross stitch

Every cross is two legs. The bottom leg goes from the bottom left corner to the top right; the top leg from the bottom right to the top left, over it. Press play to watch the needle, and turn the fabric to look from any side.

A full cross stitch, step by step (shown in 3D on the page):
  1. Bring the needle up from the back at 1, the bottom left corner of the square.
  2. Go down at 2, the top right corner. This is the bottom leg: half of the X.
  3. Come up at 3, the bottom right corner.
  4. Go down at 4, the top left corner. The top leg lies over the first one, and the X is done.
  5. Turned over: on the back, a short straight stitch joins the two legs.

Tip: Make every top leg lean the same way across the whole piece. Which way does not matter; that they all match does. It is the one habit that makes cross stitch look neat.

Stitching a row: two ways

Most of a pattern is patches of one colour, so you rarely make a lone X. There are two ways to work a row, and both are right.

One cross at a time, often called the English method: finish each X before you move on. Good for single stitches, scattered stitches and diagonal lines.

One cross at a time, step by step (shown in 3D on the page):
  1. Make a whole X: up at 1, down at 2, up at 3, down at 4.
  2. Move to the next square and make the next X the same way. It shares two holes with the first.
  3. And the next. Each X is finished before you start another.
  4. The back has straight and slanted lines. This way suits single stitches and diagonal lines.

Half crosses first, often called the Danish method: stitch a row of bottom legs, then come back along it with the top legs. Quicker for blocks of colour, and the tops stay even. It is how Stitch Assist sets out each row.

Half crosses first, then back, step by step (shown in 3D on the page):
  1. Come up at 1, the bottom left of the first square, and go down at 2, its top right.
  2. Carry on along the row, the same half stitch in each square. They all lean the same way.
  3. At the end of the row, come back: up at the bottom right, down at the top left.
  4. Cross every half on the way back. Neighbouring stitches share holes.
  5. The back is neat straight lines, and the tail left at the start is caught under them.

Neighbouring stitches share holes: the corner of one X goes in the same hole as the corner of the next. Count from a stitch you have made, not from the edge of the fabric, and check yourself at the bold lines every 10 squares.

Keep the thread snug, not tight. It should lie flat without pulling the holes out of shape.

Start a thread without a knot

A knot makes a lump on the back that shows when the piece is framed, and it can pull through Aida’s holes. Cross stitchers start without one, in one of three ways.

The loop start, the neatest, for an even number of strands (2 or 4): take one strand twice as long, fold it in half and thread both cut ends through the needle.

The loop start, step by step (shown in 3D on the page):
  1. Fold one strand in half and thread both cut ends through the needle. From the back, come up at 1, and stop while the loop is still at the back.
  2. Go down at 2. That is the first half of the X.
  3. At the back, pass the needle through the waiting loop and pull gently. The loop holds the thread: no knot.
  4. Come up at 3 and go down at 4 to finish the X.

The away knot, for any number of strands: the knot sits on the front, out of the way, while your stitches cover the thread at the back. Then you snip it off.

The away knot, step by step (shown in 3D on the page):
  1. Knot the end of the thread. Go down from the front a few squares away, on the side you will stitch towards.
  2. Come up where the row starts.
  3. Stitch the row. At the back, the stitches cover the thread on its way from the knot.
  4. Turned over: the thread is caught under the stitches.
  5. Snip the knot off on the front. The thread is held fast.

The tail start, the simplest: come up from the back, leaving about 2.5 cm (1 in) of thread behind. Hold the tail flat with a finger against the back, along the way you will stitch, and catch it under your first 4 or 5 stitches. The Danish row above starts this way: turn it over to see the tail held under the stitches.

End a thread, and move to the next patch

When about 8 cm (3 in) of thread is left, or a colour is finished, end it at the back.

Ending a thread, step by step (shown in 3D on the page):
  1. Finish your last stitch, with the needle at the back.
  2. At the back, slide the needle under the backs of 3 or 4 stitches nearby.
  3. Pull it through and snip the thread close. No knot needed.

Going on to a patch of the same colour more than about 3 squares away? End the thread and start again there, rather than carrying it across the back: a long carry can show through, especially a dark one under a pale fabric.

Starting a new thread near stitches you have made: slide its tail under the backs of a few of them in the same way, instead of a loop or a knot.

Half stitch

A half stitch is the bottom leg of a cross on its own. Charts use it for shading, skies and soft backgrounds, and it uses half the thread. Lean every half stitch the same way as the bottom legs of your crosses.

Half stitch, step by step (shown in 3D on the page):
  1. A half stitch is one leg of the X: up at 1, the bottom left, and down at 2, the top right.
  2. Work a row of them, all leaning the same way. Charts use them for shading and soft backgrounds.
  3. The back has short straight stitches.

In Crosserly, Stitch: Half stitch in Size and fabric makes a whole pattern of them; the Edit tray’s Half draws single ones.

Quarter and three-quarter stitches

Part stitches round off curves and edges, so a cat’s ear or the edge of a petal is not a staircase. On the chart they show as a square split corner to corner, or a small symbol in one corner.

Quarter and three-quarter stitches, step by step (shown in 3D on the page):
  1. A quarter stitch runs from a corner to the middle of the square. Come up at 1, the top left corner.
  2. Go down at 2, the middle. On Aida there is no hole there: push the needle through the middle of the block.
  3. A three-quarter stitch starts as a half stitch: up at 1, down at 2.
  4. Then a quarter stitch from the other corner into the middle, over the long leg: up at 3, down at 4.

On Aida, the quarter leg goes through the middle of a block, where there is no hole: push the needle firmly through the weave. On evenweave and linen, stitched over 2 threads, there is a hole there already. In Crosserly, Smooth edges with 3/4 stitches in Fine-tune adds them along the edge of a cut-out subject.

Backstitch

Backstitch draws lines: outlines, whiskers, letters. It goes on last, over the crosses, usually with 1 strand. Each stitch goes back to meet the one before, which makes an unbroken line.

Backstitch, step by step (shown in 3D on the page):
  1. Backstitch goes on last, over the crosses, usually with 1 strand. Come up at 1, one square along from where the line starts.
  2. Go back and down at 2, the start of the line.
  3. Come up at 3, one square further on.
  4. Go back down at 1, the hole the last stitch came out of.
  5. Keep going the same way, round corners too: up one square ahead, back down into the end of the last stitch.
  6. On the back, backstitch makes longer stitches that overlap.

Lines on the chart run along the grid or across squares, and each stitch goes hole to hole. In Crosserly, Backstitch outline in Fine-tune adds outlines for you, and the Edit tray’s Backstitch draws them by hand.

French knot

A French knot is a little raised dot: eyes, flower centres, the dot on an i. It is the stitch beginners worry about most, and it comes down to two things: keep the wraps snug round the needle, and go down beside where you came up, not into the same hole.

French knot, step by step (shown in 3D on the page):
  1. Come up at 1, where the knot goes.
  2. Hold the needle flat, close to the fabric, and wrap the thread round it twice.
  3. Keep the wraps snug, stand the needle up and push it down right beside where it came up, not into the same hole, then pull through slowly.
  4. The knot sits on the fabric. French knots make eyes, dots and flower centres.

Tip: Two wraps make a medium knot. For a bigger one, use more strands rather than more wraps: extra wraps make a loose, wobbly knot.

Mistakes, and how to fix them

What happenedWhat to do
A stitch in the wrong place or colourSlide the needle under it from the front and lift the thread out, one leg at a time. For many stitches, snip them on the front with small scissors, then pull the bits out from the back. Stitchers call this frogging: rip it, rip it.
MiscountedCount again from a bold 10-line, not from the edge. In Stitch Assist, Find my step shows exactly where you are.
Knots and tanglesUse shorter threads, and let the needle hang to untwist. Ease a knot open with the tip of the needle rather than pulling it.
Top legs facing different waysUnpick the odd ones and stitch them again, or leave them: from a little way off, few people see.
A dark thread shows through on the frontEnd the thread and start again instead of carrying it across the back.

Made a mistake on the chart instead? Undo, or change stitches by hand. More on stitching mistakes: cross stitch mistakes and how to fix them.

Finish it: wash, press and frame

  1. Wash it by hand in lukewarm water with a little gentle soap, to take out hand marks and hoop creases. Rinse it well and roll it in a towel; do not wring it.
  2. Press it face down on a thick, soft towel, so the stitches are not flattened.
  3. Frame it, finish it in a hoop, or make it into a card or a cushion.

Each step, with pictures: how to frame and display your cross stitch.

Questions

Is Crosserly free?

Yes. Making and changing patterns, the 3D preview, Stitch Assist and the shopping list need no account. A free account adds the PDF download, saving 5 patterns to your account, My threads and sharing on Free Patterns.

How big will my cross stitch be?

Divide the stitches by the fabric count. 140 stitches on 14-count Aida is 10 inches (25.4 cm). Crosserly shows the finished size as you change the fabric, and the shopping list adds 7.5 cm (3 in) a side to cut.

How many strands of floss should I use?

Usually 2 on 14- to 18-count Aida, 3 on 11-count, and 1 for backstitch. Your pattern says, and Crosserly’s thread list shows the strands for each thread.

Where do I start stitching?

In the middle. Fold the fabric in half both ways to find its middle, and follow the arrows on the chart’s edges to find the chart’s. Starting there keeps the design centred.

Should I tie a knot at the end of my thread?

It is best not to. Start with a loop start, an away knot or a tail held under your first stitches, and end by sliding the needle under the backs of a few stitches.

Which way should the top stitch go?

Either way, as long as every top leg in the piece goes the same way. Most stitchers go from bottom right to top left, over a bottom leg from bottom left to top right.

Should I stitch one cross at a time, or half crosses first?

Both are right. One at a time (the English method) suits single stitches and diagonals; half crosses first and back (the Danish method) is quicker for rows of one colour. Many stitchers use both.

Can I follow my pattern on my phone?

Yes, with Stitch Assist. It shows the next stitches one step at a time, or lets you tap the ones you have done, and remembers where you are. It works on patterns you make and on PDF or OXS patterns you open.

Can I use a pattern I bought somewhere else?

Yes. Choose Open a pattern and pick its PDF or OXS file. It opens ready for Stitch Assist. Backstitch is not read from PDFs yet.

How do I fix a mistake on my chart?

Press Undo, or press Edit and draw, fill or erase stitches by hand. Every change can be undone.

Do I need a hoop?

No. A hoop or frame keeps the fabric flat and the stitches even, but many stitchers hold the fabric in their hand. Big pieces go on a scroll frame, and Crosserly’s 3D view shows which suits your pattern.

The 3D does not work on my device. What can I do?

In the pattern maker, choose Try simpler 3D, or Show the stitched picture instead. In this guide, each stitch also plays as a flat drawing, and its steps are written under it.

Something not here? Ask us, and we will add it.

More guides: Photo to pattern guide · Cross stitch app for beginners · PDF charts on iPhone · Pattern makers compared · Crosserly and Pic2Pat · Crosserly and Stitch Fiddle · Crosserly and FlossCross · Patterns from your stash · Fabric calculator · DMC colour chart · DMC to Anchor chart · Blog